The wax production equipment consists of a wax melting system, a spray system, a drum (with internal cooling water), a water/steam output and input system, a water storage tank, a wax powder transmission system, etc. Paraffin wax is transformed into wax water through the melting of wax, which is sprayed onto a rotating drum (with cooling water inside). The cooled wax is vibrated to form granular wax powder, which is transported to the wax powder output port. Due to climate reasons, equipment may experience condensation in a certain system, such as cooling water, wax water, etc., resulting in equipment blockage. Or the melted wax part cannot reach the melting point. The above equipment can use self limiting temperature or constant power electric heating strips. The installation method is very simple. In addition to being used for pipeline and tank electric heat tracing engineering, it can also meet the heat tracing needs of various equipment.
The electric heating strip of the wax making equipment has a shielding layer explosion-proof mesh, which has excellent resistance to static electricity and can be connected to the ground and nearby to avoid ignition. The self limiting temperature electric heating strip has explosion-proof, waterproof, and all-weather working performance, high reliability, power self-regulation, temperature self-control, and can better control the entire process pipeline heating system.
The electric heating strip of the wax making equipment can achieve temperature control, and can be cut and overlapped at will. When installing, only the electric heating strip needs to be tightly attached to the outer wall of the pipeline, and it is also fixed with aluminum foil tape or pressure sensitive tape as an auxiliary heating accessory. The insulation cotton is then wrapped outside, and when insulation is needed, the power supply can be directly turned on.
The electric tracing band of wax making equipment is converted from electric energy to thermal energy, with high Factor of safety, no pollution and dust, and no pollution to the air. It is suitable for the insulation and antifreeze of any liquid pipeline, more environmentally friendly and energy-saving. The electric tracing band is suitable for the insulation of Peanut oil pipeline, and will not cause secondary pollution. Therefore, the electric tracing band is a practical and environmentally friendly insulation product.
